The Zeekr X has a reported range of approximately 400 km and the vehicle has a Type 2 socket. All of the Type 2 charging cables that we have available to buy on this page (listed below) are compatible for charging all models of the Zeekr X including the Standard Range and Long Range models. The maximum charging speed when connected to an AC charging point is 22kW. Concerned that your vehicle might draw too much current from the charging cable? Don’t worry. Regardless of whether the cable is 7kW, 11kW, or 22kW, it’s safe to use. Your vehicle will only draw the amount of current that the charging cable or power source can provide.
Which is the best Mode 3 Type 2 to Type 2 charging cable for the Zeekr X?
We recommend the 3 Phase 32A charging cable for charging the Zeekr X at a public charging station or home wallbox. The 3 Phase 16A cable will provide up to 11kW when using a 3 Phase charging point.
Which Schuko charger is recommended for charging the Zeekr X with a 16A Schuko plug?
If you require a single phase 2 pin household charger (also known as Mode 2, Schuko charging cable and portable charger) for charging the Zeekr X with a 16A 230V Type F household / Schuko socket, we recommend our variable power 8A 10A 13A 16A Schuko charger because it is suitable for charging an electrical vehicle at lower currents. The fixed 16A Schuko charging cable that is recommended for emergency charging is not suitable for regularly charging an electrical vehicle. The fixed 16A household charger might also require a Type B RCD to be fitted in your fuse board. The adjustable 8A 10A 13A 16A Schuko charging cable has Type B 6mA DC protection built in.
Can I charge the Zeekr X with a CEE socket?
If your premises has a CEE socket (also known as Commando socket, CEEform or high power socket), or you want to charge your vehicle at a location that has one, such as an industrial unit, campsite or marina, then we have a selection of 1 Phase and 3 Phase CEE charging cables to fit all all 3 pin and 5 pin CEE sockets. The CEE socket may be 1 Phase 16A or 32A or 3 phase 16A or 32A. So please check before you buy. We also sell a multi adapter charger that can be used to charge the Zeekr X with both 3 Phase (red) 16A (11kW) and 32A (22kW) CEE sockets and both 1 Phase (blue) 16A (3,7kW) and 32A (7,4kW) CEE sockets.
Which charging cables are included with the Zeekr X?
The Zeekr X is usually supplied with a Type 2 to Type 2 32A charging cable and Type 2 to Schuko charging cable. From experience, we know that this information can change. Even when a cable does not come factory supplied with the EV, the dealer / seller still might provide one anyway or the manufacturer may stop including a cable as standard. The best way to be certain is to contact your dealer / seller to confirm which charging cable(s) are supplied with the vehicle.
Zeekr X Charging Specifications Based on charging 400 km
Max Charging Capacity AC
22kW
Vehicle Socket Type
Type 2
EV Charging Cable
Charging Time
Type 2 16A 1 Phase 3kW
20 h
Type 2 32A 1 Phase 7kW
10 h
Type 2 16A 3 Phase 11kW
8 h
Type 2 32A 3 Phase 22kW
4 h
Type 2 to Schuko charging at 10A
35 h
Recommended T2 to T2 cable
Type 2 32A 3 Phase (22kW)
The recommended charging speed for a household socket is 10A. If you are charging at 16A, reference the charging time for 16A 1 Phase 3kW. All charging times are approximate due to the variables that can influence the charging times. To date, all Zeekr models manufactured for Europe have an AC Type 2 socket.
This is a guide only and the charging times and charging capacity depend upon the model and battery capacity of your electric vehicle as well as the charging capacity of the charging point. A charging cable described as 3kW has a maximum charge of 3,7kW. A charging cable described as 7kW has a maximum charge of 7,4kW. The EV cables below are not manufactured by Zeekr. However, all the cables below are compatible with this EV. Please read your vehicle handbook for specific charging information.
129.00 € – 235.00 € vat includedSelect options This product has multiple variants. The options may be chosen on the product page
