Honda e:NY1 – 3 pin Charger 10A For Backup / Emergency Charging

170.00 € – 190.00 € vat included

Honda e:NY1 compatible Mode 2 mobile charger / Notladekabel that will charge the Honda e:NY1 at 16A. This mobile charging cable will provide the Honda e:NY1 with up to 3,7kW when connected to a 16A Schuko socket. This is equivalent to approximately 15 to 25 kM of charge per hour.

If you plan to charge your vehicle regularly using a standard Schuko socket, we recommend our adjustable current Schuko charger, which has an integrated sensor that provides DC current detection equivalent to a Type B RCD and an optional temperature sensor in the plug.

Please note that the unit box of this 16A fixed amp charger is IP65. This means that the unit box should be sheltered during heavy rain or snow. If you are placing the control box outdoors, we recommend the IP67 waterproof option that is available for the adjustable current Schuko charger.

Please consult with an electrician to ensure that the socket and electrical circuit used for charging your vehicle is suitable for charging a BEV / PHEV. Read below for important details about this Schuko charging cable.

Bag included for cables up to 15M.

Free shipping available.

Extended 3 year warranty. See below.

Please Read Before You Buy

Our Schuko charging cables are normally returned for one of the reasons below. Reading this information may help you to avoid having to return the charger. Please also read all the information on this page as it contains important information about this Schuko charger.

Ensure compatibility between the charging cable and your vehicle. The images on this page provide a visual guide to the connector pins, allowing you to match the cable plug to your vehicle socket. You can also use our EV Cable Finder to locate your vehicle and explore the charging cables available for your vehicle.

Is the cable long enough? Measure the distance from your Schuko socket to your Type 2 vehicle socket, typically where your vehicle is parked, and add half a meter to prevent overstretching the cable.

Cable Care & Warranty

To ensure the proper care of your mobile charger, be sure to follow the safety instructions outlined in the user booklet provided with your charging cable. These Schuko chargers have a 24 months repair warranty for any defects that are caused by a manufacturing fault. Following the instructions and safety information for using the Type 2 to Schuko charger will help to ensure trouble-free use. You can also register for a 36 months extended manufacturers warranty. In case you do not receive the user booklet, please notify us. Additionally, check our EV Cable Care Guide for valuable tips on safely using your mobile charger and how to avoid common issues that may lead to the charger malfunctioning.

Click the options below to view the price and availability. Click “Clear” to reset the options. Prices include VAT. Please read all of the product information below before purchasing.

Length (In Metres): No selection

More options

Clear

16A Schuko Charger For Charging All Models Of The Honda e:NY1.

This mobile Schuko charger is capable of charging the Honda e:NY1 at 16A, providing approximately 3,7kW of power. This provides the vehicle with around 15 kM to 25 kM of charge per hour. The Schuko charger is also referred to as Mode 2 charger, Notladekabel, mobile charger, mobile charging station and charging brick.

Simply plug in the charger to a standard 2-pin Type F 16A socket. Then connect the vehicle plug into the vehicle to start charging. We recommend this type of charger only to be used for emergency charging.

If you are going to charge your Honda e:NY1 for prolonged periods with a 16A Schuko socket, then we recommend our adjustable current charger. This type of charger allows charging at the recommended current of 10A, which helps to avoid heat stress on the Schuko socket.

Additionally, the adjustable current feature allows the vehicle to lower the current as well.

The variable current charger includes AC and DC current protection and has a timer that allows delayed charging from 1 to 10 hours. There is also an option for a waterproof enclosure and a temperature sensor inside the Schuko plug to help prevent the Schuko socket overheating.

Even though Schuko chargers are capable of charging safely at 16A, the recommended rate of charging is 10A. Charging at 10A significantly reduces the risk of the Schuko socket overheating.

Photo of Schuko mobile charger that connects to a 16a household socket

Picture showing a Type 2 EV socket and a CCS socket — 9 hole Type 2 / CCS socket and a 7 hole Type 2 socket

Is This Mobile Charger Suitable For The Honda e:NY1?

Choosing The Right Charger

The Honda e:NY1 has a Type 2 socket as standard, ensuring compatibility with this Notladekabel.

Charging an EV for long periods with a 16A Schuko socket may cause thermal damage to the socket. For instance, the socket may overheat in cases where it has damaged or faulty wiring, or when the electrical circuit is overloaded. It is rare, but it does happen.

For this reason, we strongly recommend that an electrician inspects the Schuko socket to certify its suitability for charging the Honda e:NY1.

We understand that, at times, you might be charging your Honda e:NY1 with a socket that has not been certified by an electrician. In such instances, we recommend the variable amp charger as it provides additional protection for the Schuko socket.

It is also a good idea to check, after a few hours of charging, that both the plug and socket are not becoming excessively hot during charging.

Do not an extension lead or adapter with this mobile charging cable. Plug the charger directly into the socket. Ensure that water does not come into contact with the Schuko plug or the Type 2 plug, and keep the charger dry when not in use. Before connecting the charger to the Honda e:NY1, be sure to read the user booklet included with the charger.

How Waterproof Is This Mobile Charging Cable?

This charger consists of four main components: the Schuko plug, the cable, the control box (unit), and the Type 2 plug.

Schuko Plug: The plug should be safe from water if you are plugging it into an indoor socket. If you are using an outdoor socket, the Schuko plug needs to be protected and you should therefore use a weatherproof socket.

Cable: The cable is waterproof as long as there are no cuts or tears in the cable sheath.

Control Box: The standard control box is IP65-rated. This rating means that the control box can withstand light rain. If you are placing the control box outside, you can select the option to upgrade to the IP67-rated control box. This rating means that the control box is fully weatherproof.

Type 2 Plug: The Type 2 plug is built with an outer shell that is designed to withstand rain and snow when connected to the vehicle socket. The vehicle socket is also designed to be watertight and should therefore provide protection from water ingress when the Type 2 plug is connected.

A common way for water to enter the Type 2 plug is when the plug cap is replaced after charging. The plug cap must always be replaced after charging your vehicle, but do ensure that the inside of the plug cap is dry. Avoid leaving the plug lying around outside, do not drag or drop the Type 2 plug on the ground and store the charger in a dry place when not in use.

Features

IP65 protection for the control box.
Certification: CE.
30mA AC Type A RCD.
Built in fault detection: Earth leakage, over voltage / under voltage, over current and surge protection.
PCB Overheating protection: The charging current will automatically reduce if the circuit board in the device box exceeds 75 degrees.

Choice Of Cable Bags

We provide a free canvas cable bag (suitable for cables up to 15M) to store this charger when not in use. You can also upgrade the bag to a cable case made from EVA material for enhanced waterproofing and impact protection. The EVA case has an elasticated strap in the bottom compartment and elasticated mesh pocket in the top. So it allows convenient storage of two cables. The EVA case can therefore carry 2 cables if each cable does not exceed 10 metres length (20M total length).

CABLE CASE

Honda e:NY1 Compatible Mobile Charging Cable Technical Data

Charging cable type	Mode 2. Schuko plug to Type 2 (IEC 62196-2) connector
Lengths available	5 Metres
Rated current	16A
Certification	CE, UKCA, TUV tested
Cable from control box to power outlet	TPE 3×2.5+2×0.75mm. Length including plug: 70cm
Cable to Type 2 vehicle plug	TPU 3×2.5+1×0.75mm
Control box dimensions	210mm (H) x 85mm (W) x 50mm (D)
IP grade	Control box: IP65. Plugs when connected to sockets: IP55
Operating voltage	220V-240V AC
Leakage protection	AC leakage 30mA
Working temperature	-30°C to 50°C
Flame retardant	UL94 V-0
Insulation resistance	10MΩ