XPENG Multi-Adapter-Ladegerät für 16A-CEE- und Schuko-Steckdosen

Charge All Models Of The Type 2 Socket Xpeng With 16A and 13A Power Sockets

The multi adapter EV charger can connect to 16A 1 Phase and 3 Phase sockets, as well as Type F, C, E and G household sockets, allowing a maximum current of up to 11kW. The adapters that are available to buy for this charger will allow one device to charge the Type 2 socket Xpeng with the following power outlets:

3 Phase 16A CEE (Commando) 5 pin socket
1 Phase 16A CEE (Commando) 3 pin socket
16A Euro 2 pin Type C, E, F (Schuko) socket
13A UK 3 pin socket

Regardless of whether the power socket supplies more current than the Xpeng EV can accept, it is the vehicle that determines the maximum current it draws from the mobile charger. This charger will therefore only provide up to the maximum charging capacity that the vehicle can handle.

The multi-adapter charger offers variable current. Your vehicle can be charged at 1 Phase or 3 Phase power with options of 6A, 8A, 10A, 13A, 16A. This universal multi-adapter charger is therefore compatible with (solar panel, Photovoltaic) PV Systems. The device also retains the chosen setting for subsequent charges.

Is This The Right Charger For My Vehicle?

The Xpeng EV has a Type 2 socket as standard, thus ensuring compatibility with this multi socket charger. Please note that the manufacturer of this vehicle did not manufacture this charging cable.

Ensure that the power socket used to charge your vehicle has been certified for charging an electric vehicle by a qualified electrician.

Please also check the information at the top of this page, “Please Read Before You Buy”, to help avoid the most common reasons for returning a charging cable.

Multi Adapters

The adapters that are available for this multi socket charger allows the Xpeng vehicle to be charged from 5 pin 16A and 3 pin 16A CEE sockets. There are also adapters for charging the vehicle with a 2 pin 16A Euro (Type C, E, F) socket and a 3 pin 13A UK (Type G) socket. The charger will detect the voltage of the power supply so it will auto switch to 1 Phase or 3 Phase power.

Therefore, this multi socket socket charger is suitable if you want to charge your vehicle with a 16A socket when going camping, charging your vehicle with an industrial red socket at work, or if you are travelling abroad.

If you want a multi socket charger that will connect to 32A Commando and 13A mains sockets as well as the 16A CEE and Euro sockets, then the 32A universal EV charger is recommended.

When using this 16A charger with the adapter / power outlets displayed in the table below, the charger will provide the following maximum currents:

Please note that the multi-adapter charger should only be set to the recognised safe limits for 230v household sockets. In most European countries, this is usually 10A or less.. The Schuko adapter is only to be used with the 2 pin Euro Type F, E or C socket.

The maximum current displayed in the above table will not necessarily be the current that the EV / PHEV will accept. That is, the vehicle will only accept up to the maximum AC current of its onboard charger.